Now's the time to scout your yard for hiding snails and slug trials.

A good snail and slug management program relies on a combination of methods. The first step is to eliminate, to the extent possible, all places where snails or slugs can hide during the day. Boards, stones, debris, weedy areas around tree trunks, leafy branches growing close to the ground, and dense ground covers such as ivy are ideal sheltering spots. There will be shelters that are not possible to eliminate—e.g., low ledges on fences, the undersides of wooden decks, and water meter boxes. Make a regular practice of trapping and removing snails and slugs in these areas. Also, locate vegetable gardens or susceptible plants as far away as possible from these areas. Reducing hiding places allows fewer snails and slugs to survive. The survivors congregate in the remaining shelters, where they can more easily be located and removed. Switching from sprinkler irrigation to drip irrigation will reduce humidity and moist surfaces, making the habitat less favorable for these pests. Choose snail-proof plants for areas where snails and slugs are dense. Copper barriers can be useful for protecting especially susceptible plants. Though baits can be part of a management program for snails and slugs, by themselves they don’t provide adequate control in gardens that contain plenty of shelter, food, and moisture.

Handpicking

Handpicking can be very effective if done thoroughly on a regular basis. At first it should be done daily. After the population has noticeably declined, a weekly handpicking may be sufficient. To draw out snails, water the infested area in the late afternoon. After dark, search them out using a flashlight, pick them up (rubber gloves are handy when slugs are involved), place them in a plastic bag, and dispose of them in the trash; or they can be put in a bucket with soapy water and then disposed of in your compost pile. Alternatively, captured snails and slugs can be crushed and left in the garden. Household ammonia diluted to a 5 to 10% solution in water can also be sprayed on collected slugs to kill them.

Traps

Snails and slugs can be trapped under boards or flower pots positioned throughout the garden and landscape. Inverted melon rinds make good traps. You can make traps from 12" x 15" boards (or any easy-to-handle size) raised off the ground by 1-inch runners. The runners make it easy for the pests to crawl underneath. Scrape off the accumulated snails and slugs daily and destroy them. Crushing is the most common method of destruction. Do not use salt to destroy snails and slugs; it will increase soil salinity.

Beer-baited traps have been used to trap and drown slugs and snails; however, they are not very effective for the labor involved. Beer traps attract slugs and snails within an area of only a few feet, and must be refilled every few days to keep the level deep enough to drown the mollusks. Traps are buried at ground level, so the mollusks easily fall into them. It is the fermented product that attracts them and a sugar-water and yeast mixture can be used in place of beer. Traps must have deep, vertical sides to keep the snails and slugs from crawling out and a top to reduce evaporation. Snail and slug traps can also be purchased at garden supply stores.

Barriers

Several types of barriers will keep snails and slugs out of planting beds. The easiest to maintain are those made with copper flashing and screen. Copper barriers are effective because it is thought that the copper reacts with the slime that the snail or slug secretes, causing a flow of electricity. Vertical copper screens can be erected around planting beds. The screen should be 6 inches tall and buried several inches below the soil to prevent slugs from crawling through the soil beneath the barrier.

Copper foil (for example, Snail-Barr) can be wrapped around planting boxes, headers, or trunks to repel snails for several years. When banding trunks, wrap the copper foil around the trunk, tab side down, and cut it to allow an 8-inch overlap. Attach one end or the middle of the band to the trunk with one staple oriented parallel to the trunk. Overlap and fasten the ends with one or two large paper clips to allow the copper band to slide as the trunk grows. Bend the tabs out at a 90° angle from the trunk. The bands need to be cleaned occasionally with a vinegar solution. When using copper bands on planter boxes, be sure the soil within the boxes is snail-free before applying bands. If it is not, handpick the snails and slugs from the soil after applying the band until the box is free of these pests.

Instead of copper bands, Bordeaux mixture (a copper sulfate and hydrated lime mixture) or copper sulfate alone can be brushed on trunks to repel snails. One treatment should last about a year. Adding a commercial spreader or white latex paint may increase the persistence of Bordeaux mixture through two seasons. Barriers of dry ashes or diatomaceous earth, heaped in a band 1 inch high and 3 inches wide around the garden, have also been shown to be effective. However, these barriers lose their effectiveness after becoming damp and are therefore difficult to maintain and not very useful in most garden situations.

For more information on Snail IPM click here